Πλωτές Προβλήτες

Αυτή είναι η κατηγορία Πλωτές Προβλήτες των Προϊόντων

ΠΛΩΤΗ ΠΡΟΒΛΗΤΑ ΤΥΠΟΥ SF 1800

SF1800 series is a pontoon with a structural height of 180 cm and an unloaded freeboard of about one meter. They are available in widths from 4 meters up to 8 meters and in lengths up to 30 meters.

SF1800 series is mainly used for very heavy piers, piers for commercial vessels but also as a foundation for the floating house.

Then SF1800 series is the whim of special specialized product, we are available to discuss your project in more detail.

SF 1800 product sheet


ΠΛΩΤΗ ΠΡΟΒΛΗΤΑ ΤΥΠΟΥ SF 1200

SF1200 series is a product primarily developed for commercial ports where tough wear all year long is the wait. It has very strong armor and thick cover layer in its original version. In recent years, however, we have noticed an increased interest in SF1200 Series features, primarily the 60 cm high freeboard and the higher weight, even within the recreation area where both marinas and individuals expressed their wish for a slightly higher freeboard than the usual 50 cm we have on SF1000 series.

Due to the expanded interest in SF1200 series, we have developed a variant of the SF1200 which we removed double reinforcement in the walls and little else as we assessed the excess of these, slightly less vulnerable applications. Thus, we have arrived at a very cost effective pontoon with a freeboard of 60 cm. SF1200 series is a very comfortable product and although the 10 cm difference in freeboard compared with SF1000 series sounds a bit gives the much smaller splash up on the bridge when the wind blows.

It is important to consider that our range of Y-boom is designed to rest on pontoons with a flying height of 50 cm, which means we have to modify the slipways to be taken against a SF1200 series.

SF1200 series is available in widths from 3 meters to 8 meters.

SF 1200 product sheet


ΠΛΩΤΗ ΠΡΟΒΛΗΤΑ ΤΥΠΟΥ SF 1500

SF1500 Series is a series for the really demanding situations where you want to have a freeboard of around 75 cm. It is double reinforced in all the walls, and this extra thick coatings to at all times be perceived as stable. Common challenges for our 1500 series are for different types of floating berths around the world and be equipped as often as pålföranring for seaflexförankring / chain anchor. It is available in widths from 4 meters to 8 meters.

SF1500 series is a very stable product series that are customized to the smallest detail. It is a product that initalt may seem pricey, but spread over 50 years, we can guarantee that the low maintenance costs mean that SF1500 series is a very affordable option in terms of LCC (Life Cycle Cost).

Thinking about a project where a SF1500 product is eligible, do not hesitate and get in touch with us as we work together the best proposal for you.

SF 1500 product sheet


ΠΛΩΤΗ ΠΡΟΒΛΗΤΑ ΤΥΠΟΥ SF 1000

The SF1000 series is the best seller in our catalog, which is explained by the wide range of applications. Within the series, we find pontoons with widths from 2.4 meter concrete width up to 8 feet. Pontoons in SF1000 series floats with a freeboard of about 50cm depending on model and equipment. We produce it in lengths from 10 meters up to 25 meters. Together with you, we look at your situation and then design the pontoon that best meets your needs. The series is based on a number of well thought out technical solutions that we have developed and improved for over 30 years. We are very proud of our design for junction boxes where our concept of spreading loads out into the concrete in such a way that the sea cannot manage to destroy.

All pontoons in SF1000 Series are equipped with standard embedded stainless fittings, embedded conduits and pipes for electricity and water, super strong coupling wells, finger jointed fenders and solid rubber spacers between the concrete and wood fenders. All pontoons are solidly reinforced and we have proven solutions to solve most challenges presented in terms of odd angles, center links, specially requested wood decking or specific requirements for utility wells and cleats. It goes without saying that with such a high level of customization available, the pontoon is quite unique.

Depending on the situation and the desired function, it is important to choose the correct type of anchor wells and mooring-rings.

SF1024 – With fenders,  this 2.65 meter wide pontoon makes an excellent dock for individuals or yacht clubs with many available options to customize their dock.

SF1030 – Comfort dock for marinas as well as larger private facilities. Our best selling pontoon. The width allows convenient access on the pier even after the installation of utility poles.

SF1040 – A four-meter-wide highly effective wave dampening pontoon. Often used in more vulnerable locations as an alternative to the SF300 breakwater. Also used as the main pontoon to which several narrower pontoons are connected.

SF1050-1080 – 5-8 meters wide pontoons with superior wave attenuating properties. Contact us for more information.

SF 1000 product sheet


Τα cookies είναι σημαντικά για την εύρυθμη λειτουργία του ιστότοπου και για την βελτίωση της online εμπειρία σας. Πατήστε «Αποδοχή» για να συνεχίσετε ή επιλέξτε «Περισσότερα» για να δείτε λεπτομερείς περιγραφές των τύπων cookies.
Περισσότερα